Canadian Electrical Industry News Week

 

May 18, 2018

GavinLocated in the Montreal borough of Ville Saint-Laurent, the Gavin Centre offers state-of-the-art virtual offices and executive suites to a broad range of clients. The building, constructed in the 1960s and renovated in 2004, houses 15 fully furnished suites, a modern boardroom and a full-time receptionist. There is also an adjoining Tim Hortons in the same building.

When the Gavin Centre management reviewed energy and maintenance costs for the building, they determined that they could save significantly on both counts by replacing older lighting with newer LED alternatives. Gavin Centre Director Daniel Mammone recognized the potential for a double win with a lighting upgrade.

“We wanted to reduce energy and maintenance costs, and knew we had to look at a lighting upgrade to achieve this,” says Mammone. “With the commitment to improved lighting we also saw an opportunity to improve the aesthetics of the building. The Gavin Centre is situated next to a major highway, and is therefore very visible. We felt we could drive client interest in our facility with better lighting.”

Working with a local contractor, the Gavin Centre selected Concept Illumination as the lighting partner for the upgrade. The team set about replacing lighting throughout the building, including in the suites, the boardroom, bathrooms, corridors and lobby area. They also replaced wall packs on the exterior of the building.

Inside a mix of 2ft x 2ft and 2ft x 4ft LED panels were installed for general illumination, all with uniform 3500K colour temperature and 0-10V dimmable. In all around 150 fluorescent fixtures were replaced with contemporary LED panels throughout the building’s interior, improving light levels while modernizing the space.

Outside, 20 LED wall packs replaced high pressure sodium predecessors to accent the building’s columns. The light produced by the new LED luminaires delivers a crisper 4000K light than the orange light produced by the high pressure sodium fixtures.

With big windows along the building’s front providing a view into the interior from outside, the new indoor and outdoor lighting works together well to present the Gavin Centre as modern and inviting to potential clients driving by.

The lighting renovation has reduced energy costs by two-thirds, and the more reliable, longer life LED fixtures have eliminated maintenance costs associated with changing bulbs and tubes.

The centre has also seen an increase in business since the new lighting was installed: “There is no doubt the lighting upgrade has resulted in more clients. It’s made the whole building look more welcoming, both inside and out,” says Mammone.

Changing Scene

  • Prev
The Solar Energy Society of Alberta and Energy Efficiency Alberta, in partnership with the ...
Nat will develop and execute on key sales strategies along with leading his team to drive strong ...
John MacDonald (better known as Satch) has decided that he will retire from Ideal Supply at the end ...
Aspiring skilled trades participants recently descended upon annual Skills Competitions held in ...
Join WiRE and partners 20/20 Catalysts Program and the Aboriginal Apprenticeship Board of Ontario ...
A new program launched by Nova Scotia with federal government support will provide rebates of up to ...
The National Electrical Contractor Association announced on June 18 that Southwire has been ...
Located 160 kilometres west of the Porcupine mine in Chapleau, Ontario, Borden is set to be ...
  Schneider Electric, the leader in the digital transformation of energy management and ...
The 2018 IDEAL Nationals Championship is well underway across Canada. In fact, we have reached the ...

Electrician Forum Brought to you by Schneider Electric

Schneider Electric

June 25, 2018

Sponsored by Schneider Electric

Today we are all concerned with the energy we consume within our homes. But how many truly understand the ins and outs of home energy use, and where exactly does the electrician and the development of energy management systems come into play. There is much to consider when discussing home energy use. The consumer first off needs to be informed about energy use, how it is calculated and ultimately billed if they are to make changes to their energy consumption rates. But in terms of educating consumers does the residential electrician have a role? And beyond that are manufacturers developing products designed to help electricians and consumers better understand residential energy use? Throughout this article we will deal with each of these important questions.

Read More

Codes and Regulations Brought to You by the CSA Group

  • Prev
In this article: Section 58 — Passenger Ropeways and Similar Equipment. Rule 58-000 ...
  Unauthorized CSA Group certification marks have been found on wiring by Triumph Cable ...
In this article: Section 52 — Diagnostic imaging installations. The CE code is a ...
In this article: Section 46 — Emergency Power Supply, Unit Equipment, Exit Signs, and ...
  In this article: Section 44 — Theatre Installations. The CE Code is a ...
CSA has published C22.2 No. 60947-7-3, the harmonized standard for low-voltage switchgear and ...
  Electric welders. The CE Code is a comprehensive document. Sometimes it can seem ...
  In this article: Section 40 — Electric cranes and hoists. The CE Code is a ...

 

Schneider

A new “future ready” circuit breaker from Schneider Electric is described by the company as the next generation of power distribution for the Internet of Things (IoT) era. Masterpact MTZ increases efficiency and can adapt to ever-evolving needs for safety, reliability and sustainability. The world is becoming more connected, electric, digitized, decarbonized, and decentralized, says Schneider Electric. Power distribution is facing new regulations, becoming more seamless and connected. 

Masterpact MTZ is the latest in a series of circuit breaker innovations, following Masterpact M, and then Masterpact NT/NW.

Read More



Tools for the Trade

  • Prev
  IDEAL Industries has introduced Combination Drill Taps to its tool lineup. Combining the ...
  Stripping and crimping device, 100 - 240 V input voltage, for insulated ferrules with a ...
Professional all-in-one cutter/stripper for coaxial and twisted pair cables     ...
  Klein Tools' Coax Explorrer 2 tests coaxial cable and maps up to 4 locations   ...
  Ideal Industries' T-14 wire stripper s are ideal for all professionals working within the ...
  The ATS850 conveyor eliminates all types of electro static discharge requirements. ...
  Lorik Tool & Automation has the experience and ability to manufacture a variety of ...
  Ideal Industries' 26 piece insulated Journeyman kit is ideal for new electricians or for ...
  Klein Tools Deluxe Fish Rod Set comes in 19 pieces that when assembled can fish wire and ...
  BendWorks Software was designed to help electrical contractors adopt this new process ...

Product News

  • Prev
  Quiet. Posh. Magnetic. Product Details: High-quality polycarbonate ...
  LED Task Star Pro (LTSPRO) is constructed with an aluminum housing and a matte white ...
  Cost-effective, multi-use site and area lights. Available in multiple outputs and with ...
  STR9® INGROUND is designed to be a reliable in ground fixture, with a full glass top ...
  Lumca’s Ovaali family of ultramodern architectural lighting solutions feature ...
  Because of its ingenious flexible design, SGi’s LED Flex Light brightens even the ...
  Warmup’s in-slab heating cable is excellent for installations within a concrete ...
  The Green Cable Surface XL, the ideal complement to uncoupling membranesWith its constant ...
  Duct Heaters are used in a variety of air and gas heating applications. These are ...
  The Piccolo is Convectair’s slimmest fan-forced heater. Once it has been installed, ...

 

Peers & Profiles

  • Prev
David Johns is a unique and dedicated individual both at home and in the workplace. At home he is a ...
    Sean Freeman is a vibrant, enthusiastic and selfless individual who has taken his ...
  Automation companies are drivers of innovation, and have penetrated near every industry ...
Total Electrical Solutions was founded in 2013 by Jeremy Herrington in Quispamsis, on the outskirts ...
Andrew MacLeod is a territory sales manager with Leviton Manufacturing of Canada in British ...
  Floyd Lau founded Amptek Technologies in 2002 as an end to end engineering design ...
Mike Marsh, President and CEO of SaskPower, has been a leading figure in Saskatchewan’s ...
Gordon MacDonald is a cheerful, driven individual who loves to be challenged, a trait that suits ...
  Most of us have a difficult enough time managing one job and a home life. However, some ...
  Since 2012 Barnstormer has advanced the abilities of their brewery with the installation ...

Copper $US Dollar price per pound


Jeremy Herrington

Total Electrical Solutions was founded in 2013 by Jeremy Herrington in Quispamsis, on the outskirts of Saint John, New Brunswick. Since 2013 Jeremy has steadily grown Total Electrical Solutions in the residential, commercial and construction sectors. The growth is primarily the result of Jeremy’s customer first philosophy, plus his over 20 years of industry experience.

Jeremy grew up learning about the industry from his father who was an electrical contractor. Jeremy spent his early years helping and watching his father as a contractor and business owner. After high school Jeremy was, like many, not wholly aware of the course he wished to take and so he began an electrical apprenticeship at his father’s company.

Read More

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2018 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil