Canadian Electrical Industry News Week

July 15, 2019

EIN profile TS man logo 400

By Blake Marchand

Bill Maki is an electrical engineer from Thunder Bay, Ontario working as a control systems integrator for TS Manufacturing. Maki studied Electrical Engineering at Lakehead University, following his graduation he got his start in the industry with Lakehead’s Engineering Department, where he worked for six years.

Maki got his introduction to industrial automation with the Buchanan Group, out of Thunder Bay. There, he gained some valuable experience at just 28 years old, with 10 sawmills in the area under his responsibility. As the forestry industry began to struggle Maki went into the mining industry, where he held several positions, including running his own business, Axis Engineering, which he operated for two and a half years. But what has captivated Maki most throughout his career is automation and control.

“When I got my first taste of automation and control, I was hooked. Controls guys will know exactly what I am talking about. I still remember to this day that it was the simple act of illuminating a pilot light on an operator control console via a PLC (programmable logic controller),” explained Maki, adding that controls can be incredibly rewarding. “I think of it as bringing equipment to life,” he said. “For me it is a thrill to see the machinery run for the first time (call me a geek).”

“When you have a control system that is complicated and you spend a great deal of time programming it, and then you see the final product performing as expected, there is no greater thing. This may happen at 2 in the morning with nobody but you there to see it, but it doesn’t matter the feeling is hard to describe. When that happens, it replaces the financial compensation that most people in the world are working for.”

After working as an electrical engineer for 19 years in Thunder Bay, Maki made his way to Lindsay, Ontario in 2015, taking his current position as a control systems integrator with TS Manufacturing. We asked Bill to tell us a little bit about the work TS Manufacturing does, as well as his industry experience as an Electrical Engineer.

Maki explained that TS Manufacturing is a turnkey solution provider working primarily in the hardwood sawmill industry, “and we have the ability to supply equipment that is unique in the market place,” he noted.

He added that TS Manufacturing is currently experiencing unprecedented growth with orders stretching into 2020. He noted that the majority of their customers are in the United States.

We asked Mr. Maki to take us through the service TS Manufacturing provides."
Mr. Maki

 

 

 

 

 

 

 

 

 

 

TS Manufacturing has a complete Engineering department that includes mechanical and electrical engineers. We custom build the mechanical equipment in our fabrication shop. We also build all of our motor control panels, operator consoles, etc. in house. This allows for a great deal of quality control regarding the final product.

We also oversee the installation of the equipment, both mechanically and electrically.

The final step is to commission the equipment at the customer’s site and hand it over once it has met the performance requirements.

We also offer remote support when the equipment has entered the production stage.

You said you are working primarily with Kinetix 5700 Drives. Is there a particular reason for that? What aspects of this drive system make it suitable to what TS Manufacturing does?

I have worked with numerous types of drives from different manufacturers, Toshiba, Schneider, ABB probably forgetting a few, but mainly I have the most experience with the Allen Bradley drives. Not to date myself, but I began with the 1336 AB drive family and have worked with the PowerFlex 523, 525, 527, and 755s so I have seen the complete Allen Bradley evolution. The Kinetix drive system is in my mind a game changer.

The Kinetix 5700 drive was developed and is intended to be used for servo motor control. However, they can also be used to control typical AC induction motors in both position and frequency modes of operation. What makes the 5700 drive unique is that it is programmed and controlled in a completely different manner from historic variable speed drives. All of the drive commands for operation are motion based even when using non-encoder motors. It takes a bit of getting use to, but once you understand the motion commands it makes drive programming a great deal easier and you have such more control.

The drive parameters such as nameplate data, accel, decel, etc. are stored in the PLC processor, not in the drive itself. This allows for a drive change to be done quite easily; replacing a failed drive (heaven forbid) can be accomplished in 10 minutes. The only parameter that needs to be changed is the static IP address of the drive. Trust me, as I have done this myself and I am not an electrician (as many of my electrician friends would be quick to point out).

The 5700 drive system also incorporates a shared DC bus. This allows for the drives to be installed in an enclosure with a significantly small footprint.

The shared DC bus also has other advantages in that the entire drive line-up is “sharing” the bus. This results in an incredible reduction in power consumption. Some of the results I have seen in the field I still do not believe.

The shared DC bus requires only one incoming feeder that reduces the amount of line supply feeds required to operate numerous motors. This is an obvious savings in installation cost.

We are currently working on a hardwood mill that has in excess of 100 motors. We do not have a single typical motor starter at that job site. Every motor at that mill will be controlled by a 5700 drive, excluding 2 soft starts for the larger HP motors.

How has the industry evolved/changed throughout your career? What technological/industry developments have had the biggest impact on what you do?

Easily the number one thing that has had the greatest impact is communications to control devices and variable speed drives. Ethernet communications have made things possible that 20 years ago could only be dreamed about. I now have the ability to remotely control equipment from my office chair that I could never accomplish even if the equipment was 20 feet away from me. Long gone are the days where you have to plug directly into the PLC or device, which more often than not was in an undesirable location. This also consumed time to get their set-up configure connect, etc., not to mention the fact that it could put you in a dangerous position safety-wise.

The evolution of the PLC processor has also been quite incredible. The speed at which a large number of complex tasks can be performed is amazing. The amount of equipment that can be controlled from a single processor is remarkable when looking back.

The ease of connectivity and the access to significant status and diagnostic data has allowed for machine operation and decreased downtime that was not possible before.

Can you tell us about a job you did that you found interesting or unique?

All of them.

But seriously, I can give you two:

DNCG (dilute non-combustible gas collection) at AV Terrace Bay. It involved a significant mechanical installation of stainless steel piping, ducting and equipment as well as a complex control system. I found it unique in that there are not many systems in the world like it and that it was done to improve the environment. In effect, harmful gases in the pulp mill were collected and injected into a recovery boiler to be incinerated.

The Accuplacer was manufactured by TS Manufacturing. It places sticks on top of a tier of lumber in preparation for kiln drying. This piece of equipment is something to behold in operation. It is basically a robot with 16 arms operating at a very high speed.

What about a job that brought an unexpected challenge?

Not control related, but when we were doing a power transformer replacement at a pulp mill, unfortunately, we closed in on a symmetrical three phase bolted electrical fault (dead short all 3 phases) at 13.8 kV. This caused a complete blackout of the mill during a shutdown. People were working inside confined vessels such as tanks and boilers. I, along with a co-worker (Adam McGrath) had to very quickly analyze the situation and determine how to restore power to the mill in the quickest and safest manner possible, without causing further damage. We had the lights back on six minutes later. This showed that we could operate under extreme stress in a controlled emotional manner. I believe this is a characteristic that any control engineer in the field needs to have. Keep your head, never panic, figure it out, and implement the solution. In other words, scramble from the rough, but keep your wits about you.

For our final question, we asked Bill, as an electrical engineer and control systems integrator, with considerable experience in the mining and sawmill industries, what advice he would impart on a young individual considering a career as an engineer.

“If you want to be part of new and innovative products that will be beneficial, then follow that dream. With the advancements that we have made in just the last 10 years the world of engineering is going to be a creative and exciting place to be,” he advised. 

As you can see from Bill’s insights, the capabilities of PLCs and VFDs, and the ability to communicate with machines have been steadily advancing, creating game changing capacity for motor control, efficiency, scalability, and flexibility. These advancements have translated into a significant increase in performance data, a decrease in downtime, and improved machine operations — and ultimately a fascinating and exciting time to be within the automation and control landscape. 

TS Manufacturing is a family owned and operated manufacturer founded by Ted Smith and his brother in 1973. Their Lindsay, Ontario business grew quickly, and they expanded just three years later. They expanded once again in 1988, constructing a 50,000 sq. ft fabrication space. As their business continued to grow, they added an additional 15,000 sq. ft. in 2002. And as Bill alluded to above, their business has shown no signs of slowing down.

Blake Marchand is Assistant Editor, Panel Builder & Systems Integrator.

 

 Cablofil® Wire Mesh Cable Tray - The Conduit Alternative 

Legrand CablofilAs the safest, easiest-to-install alternative to labor-intensive conduit, wire mesh cable management tray has been the most widely adopted wiring support method for 40 years. Electrical contractors continue to rely on tried-and-tested, code-compliant cable tray for all of their installations, including those in some of the world’s harshest environments.

5 ways Cablofil beats conduit: 1. Fewer parts 2. All you need is a bolt cutter 3. Adopts to any installation 4. One person can usually install a whole system 5. Sweeps and bends can be formed on site. 

 

 

Watch the video HERE..

 

Changing Scene

  • Prev
Jacques Fiset, the new president of the EFC Quebec section, told us in a recent interview that his ...
Organised by the Hong Kong Trade Development Council (HKTDC), the twin lighting shows - the  ...
A Friday night, the end of summer, the weather is mild, and 2,500 people — customers, ...
Eaton focuses on developing personable connections in every aspect. In September, our team will be ...
During the recently held IMARK Canada 2019 meeting in Niagara Falls, executives from 14 of the ...
Valard has been selected by Wataynikaneyap Power LPto provide engineering, procurement ...
The Canadian Apprenticeship Forum-Forum Canadien sur l’Apprentissage (CAF-FCA) has announced ...
Electricity Human Resources Canada has announced this year's keynote speakers for Agents of Change ...
Kiashke Zaaging Anishinaabek (KZA)/Gull Bay First Nation (GBFN) and Ontario Power Generation (OPG) ...
The BCEA's Woman's Network THRIVE Summit is taking place on October 4th at the Executive Inn ...

Green PlugndriveThe Government of Quebec, Ingka Group (IKEA), City of Madison and several other industry and organization innovators have pledged to join CALSTART’s Global Commercial Vehicle Drive to Zero (Drive to Zero) program. 

“By joining the Drive to Zero pledge, Québec is committing to share its transportation electrification knowledge and expertise and coordinate its efforts with those of all partners to make zero-emission technology commercially viable by 2025 in the heavy vehicle sector...

 

Read More

 

 

 

Signify“Another year of record heat waves, fires in the Amazon and Siberia, and the ice caps at their smallest for centuries. The time for debate is over – now it’s time to take urgent action,” said Eric Rondolat, CEO of Signify, who spoke during the opening ceremony of Climate Week New York City.

According to Rondolat, governments worldwide need to help realize a carbon neutral world by 2050 at the latest with companies committing to a more aggressive target of 2030. When it comes to what he described as the “low-hanging fruit of energy saving actions,” Rondolat calls for the following commitments:

Read More

 

 

Codes and Regulations Brought to You by the CSA Group

  • Prev
The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the ...
The Code is a comprehensive document. Sometimes it can seem quite daunting to quickly find the ...
In this article: Tables — Part B. This section of the Code contains 99 tables of essential ...
In this article: Section 58 — Passenger Ropeways and Similar Equipment. Rule 58-000 ...
  Unauthorized CSA Group certification marks have been found on wiring by Triumph Cable ...
In this article: Section 52 — Diagnostic imaging installations. The CE code is a ...
In this article: Section 46 — Emergency Power Supply, Unit Equipment, Exit Signs, and ...
  In this article: Section 44 — Theatre Installations. The CE Code is a ...
CSA has published C22.2 No. 60947-7-3, the harmonized standard for low-voltage switchgear and ...
  Electric welders. The CE Code is a comprehensive document. Sometimes it can seem ...

Latest Articles

  • Prev
Pick up a newspaper or scan your preferred electronic newsfeed and you’ll likely see a series ...
Britech Corp, one of Canada’s largest heating cable companies has signed a formal agreement ...
Electrical enclosures serve to protect electrical devices from adverse environmental influences, ...

 

Flir Application SpotlightWithout power, factory operations cannot continue. That’s why regular scheduled maintenance is important to ensure your electrical distribution system is in working order. A combination of a thermal imager and a clamp meter can help you detect hot spots and diagnose electrical issues at the point of failure before an outage occurs, quickly and safely.  Download the Application Spotlight today.

 

 

 

 

 

Read More  

 

3M WebinarRegister for 3M Canada’s upcoming webinar: How TTS™ Heat Trace Cables can help you on site.

3M Canada will be hosting a heat trace cables webinar, where you’ll learn about heat trace, heat trace applications (i.e.: pipe freeze protection, roof and gutter, and surface snow and ice melting), and the benefits of self-regulating heat trace cables—TTS™ Heat Trace Cables.

Self-regulating heat trace cables can adjust their output to the surrounding temperature down the cable length.

Read More

 

 

Tools for the Trade

  • Prev
  IDEAL Industries has introduced Combination Drill Taps to its tool lineup. Combining the ...
  Stripping and crimping device, 100 - 240 V input voltage, for insulated ferrules with a ...
Professional all-in-one cutter/stripper for coaxial and twisted pair cables     ...
  Klein Tools' Coax Explorrer 2 tests coaxial cable and maps up to 4 locations   ...
  Ideal Industries' T-14 wire stripper s are ideal for all professionals working within the ...
  The ATS850 conveyor eliminates all types of electro static discharge requirements. ...
  Lorik Tool & Automation has the experience and ability to manufacture a variety of ...
  Ideal Industries' 26 piece insulated Journeyman kit is ideal for new electricians or for ...
  Klein Tools Deluxe Fish Rod Set comes in 19 pieces that when assembled can fish wire and ...
  BendWorks Software was designed to help electrical contractors adopt this new process ...

Flir CM94FLIR Systems have announced the release of their new FLIR CM94 2000-amp AC/DC electrical utility clamp meter. Designed to tackle high current electrical measurements in demanding utility and industrial job sites, the CM94 features an oversized jaw to easily manage larger conductors and busbars. With CAT IV-1000-volt overvoltage protection, the CM94 works on relays, distribution panels, vaults, switchgears and switchboards, as well as on service conductors, feeders, and production power lines.

 

 

 

Read More

 

Product News

  • Prev
The SYLVANIA ValueLED UFO High Bay is a DLC Premium LED fixture that has a lightweight, impact ...
Power Integrations announced new high-power-density members of ...
Tray portrays a picture frame design. The intention was to evoke the idea of empty picture frames, ...
Magic Lite introduces the next generation of their hugely successful LED Brick ...
The adorne Collection has expanded their line of designer switches and outlets to now come in the ...
Remee Wire & Cable, a leading manufacturer of electronic wire and cable, announces its new line ...
Remee Wire & Cable, a leading manufacturer of electronic wire and cable, announces new ...
The new CU81xx uninterruptible power supply (UPS) series is designed for universal use in the ...
The GRV-TEX-26F6 cable provides neat, protected wiring from the terminal connector of a groov ...
Eaton announced its latest release of the XLR-51 supercapacitor module.     ...

 

LYTSwitch DriversPower Integrations announced new high-power-density members of its LYTSwitch™-6 family of safety-isolated LED-driver ICs for smart-lighting applications. The new ICs with PowiGaN™ technology enable designs that deliver up to 110 W with 94% conversion efficiency using a simple, flexible flyback topology.

The high efficiency of the new LYTSwitch-6 ICs eliminates the need for heatsinks – greatly reducing ballast size, weight and cooling airflow requirements. The 750 V PowiGaN primary switches provide very low RDS(ON) and reduced switching losses. 

 

Read More

 

 

Copper $US Dollar price per pound

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil